1.沼氣發電機雙膜氣柜

1. Biogas Generator Double Membrane Gasholder

雙層膜氣柜外型為3/4球體，由鋼軌固定于水泥基座或厭氧罐罐頂上。主體由特殊加工聚酯材質（主要成分為紅泥軟體復合膜及紅泥軟軟體夾網布）制成，罐體由外膜、內膜、底膜（地上柜）及隸屬設備組成，具有抗紫外線及各種微生物的才能，高度防火并契合規范。

The double-layer membrane gas holder is 3/4 sphere in shape, and is fixed on the cement base or the top of the anaerobic tank by the rail. The main body is made of specially processed polyester material (mainly composed of red mud soft composite film and red mud soft sandwich mesh cloth). The tank body is composed of outer membrane, inner membrane, bottom membrane (overground cabinet) and subordinate equipment. It has the ability of anti-ultraviolet radiation and various microorganisms. It is highly fireproof and conforms to the specifications.

內膜與底膜（地上柜）之間構成一個容量可變的氣密空間用作貯存沼氣，外膜構成貯存柜的球狀外型。應用外膜進氣鼓風機恒壓，當內膜沼氣量減少時，外膜經過鼓風機進氣，堅持內膜沼氣的設計壓力，當沼氣量增加時，內膜正常伸張，經過平安閥將外膜多余空氣排出，使沼氣壓力一直恒定在一個需求的設計壓力。可調理膜式沼氣儲氣柜的保溫原理：在內外膜之間充入空氣，能有效阻撓外界冷空氣進入。

An air-tight space with variable capacity is formed between the inner membrane and the bottom membrane (overground cabinet) for biogas storage, and the outer membrane forms a spherical shape of the storage cabinet. When the amount of methane in the inner membrane decreases, the outer membrane enters through the blower, and adheres to the design pressure of the inner membrane methane. When the amount of methane increases, the inner membrane expands normally, and the excess air in the outer membrane is discharged through the safety valve, so that the methane pressure remains constant at the design pressure required. Thermal insulation principle of adjustable membrane biogas storage tank: filling air between inner and outer membranes can effectively prevent the cold air from entering.

具有以下優勢

It has the following advantages

1平安系數高

1. High safety factor

此產品十分平安牢靠, 5年以上的運用實積. 包括冰冷的德國、挪威, 中東的以色列, 極熱的撒哈拉沙漠地域以致地震頻繁的日本!完整契合/優于各國相關的法規及行業請求。設有過壓平安閥及沼氣走漏報警器。整個氣柜在工廠內制造及測試終了, 保證質量沒有導軌, 沒有升降活塞，沒有壓重, 沒有維修!氣柜沒有水封/油封/彈簧, 不怕結冰, 不須加溫，不須調整! 不會產生負壓而惹起塌頂、倒塌，完整可完成無人操作不產生污染, 沒有如濕式氣柜一樣產生大量含酚廢水, 形成二次污染 .

This product is very safe and reliable. It has been used for more than five years. It includes cold Germany, Norway, Israel in the Middle East, and Japan with frequent earthquakes in the extremely hot Sahara Desert. It fully meets/surpasses the relevant laws and regulations of various countries and industry requests. It is equipped with over-pressure safety valve and methane leakage alarm. The whole gas holder is manufactured and tested in the factory. There is no guide rail, no lifting piston, no pressure, no maintenance! There is no water seal/oil seal/spring in the gas holder, no ice, no heating, no adjustment! There is no negative pressure to cause roof collapse, collapse, complete and unmanned operation without pollution, no phenolic wastewater like the wet gas holder, forming two. Secondary pollution.

2運用壽命長

2. Long service life

內層膜運用壽命25年以上外層膜運用壽命20年以上。

The service life of inner layer is more than 25 years, and that of outer layer is more than 20 years.

3裝置便當快捷

3. Installation convenience

只需根本水泥基座, 數天時間即可完成裝置, 儉省裝置費用及時間 (例子: 2個5,000 M3 氣柜于10天內裝置完成!) 裝置完成后可立即投入運用

The installation can be completed in only a few days with the basic cement base. The cost and time of the installation can be saved (example: 2 5,000 M3 gas holders are completed in 10 days). The installation can be put into operation immediately after completion.

4節約本錢

4. Save cost

柜內容量能夠全部應用, 沒有死區，整體氣柜重量不大于5噸，大大簡化及儉省基座的土建費用。(1000m3傳統干式/濕式氣柜僅僅鋼材即重30噸以上, 沒有濕式氣柜所須的大型水槽) 造價較傳統干式或濕式氣柜更廉價。

Cabinet content can be fully applied, no dead zone, the overall weight of the gas tank is not more than 5 tons, greatly simplifying and saving the cost of civil construction of the base. (1000m3 traditional dry/wet gas holder weighs more than 30 tons of steel only, without the large water tank required for wet gas holder) the cost is cheaper than traditional dry or wet gas holder.

2.沼氣發電機水封氣柜

2. Water-sealed gas holder of biogas generator

3.沼氣發電機干式氣柜

3. Dry gas holder of biogas generator

沼氣發電機所需求的進氣壓力為5－20KPA.

The required intake pressure of biogas generator is 5-20KPA.

沼氣發電機的余熱應用：沼氣發電機的余熱應用分為兩局部；一是排煙溫度余熱應用，二是沼氣發電機本身冷卻熱量應用.

The application of waste heat of biogas generator: the application of waste heat of biogas generator can be divided into two parts: one is the application of waste heat of exhaust gas temperature, the other is the application of cooling heat of biogas generator itself.

感謝您的閱讀，此文的文章來源：沼氣發電機組更多的內容和問題請點擊：http://m.hdlelisa.com  我們會繼續努力的為您提供服務，感謝您的支持！

Thank you for reading, this article source: more content and questions of biogas generating units, please click: http://m.hdlelisa.com, we will continue to work hard to provide you with services, thank you for your support!