發電機維護保養與其他詳盡負載維護保養各不相同。由于發電機的勵磁電和電流量與一般機械設備高壓開關柜的交流電流和工作標準電壓距離十分大，我們在維護機器設備方面也有很大的區別。下面焦化發電機組廠家為您講講發電機應配備哪些維護措施

The generator maintenance is different from other detailed load maintenance. Due to the large distance between the excitation current and current of the generator and the AC current and working standard voltage of the high-voltage switchgear of general mechanical equipment, we also have great differences in the maintenance of machinery and equipment. The coking generator set manufacturer will tell you what maintenance measures the generator should be equipped with

1、縱差維護：電機轉子繞阻及其小組出線雙色過電流保護。

1. Longitudinal differential maintenance: motor rotor winding resistance and its group outgoing line two-color overcurrent protection.

2、打橫差動保護：電機轉子繞阻單相匝間過電流保護。僅有當單相電機轉子繞阻有兩個或好多個并接環城路造成2個或三個中性點輸電線時，才可以拼裝這類維護保養。

2. Horizontal differential protection: motor rotor winding single-phase interturn overcurrent protection. This type of maintenance can only be assembled when two or more single-phase motor rotor windings are connected to the ring road in parallel, resulting in two or three neutral transmission lines.

3、短路故障問題維護保養：發電機組電機轉子電磁線圈的短路故障問題維護保養。

3. Maintenance for short circuit fault: maintenance for short circuit fault of generator set motor rotor solenoid coil.

4、勵磁調節器控制電路接地保護：勵磁調節器控制電路接地系統常見問題維護保養。

4. Earthing protection of excitation regulator control circuit: maintenance of common problems of excitation regulator control circuit earthing system.

5、低勵和去磁維護保養：為了防止機發電機在低勵（勵磁電低于數據格式穩定限定相符合的勵磁電）或去磁（勵磁電為零）后從系統吸收消化許多功率因數角，對系統導致欠佳傷害，容量為100MW及以上的發電機均配備該維護機器設備。

5. Low excitation and demagnetization maintenance: in order to prevent the generator from absorbing and digesting many power factor angles from the system after low excitation (the excitation current is lower than the excitation current corresponding to the stability limit of the data format) or demagnetization (the excitation current is zero), resulting in poor damage to the system, generators with a capacity of 100MW and above are equipped with such maintenance machinery and equipment.

6、過壓保護：用于發電機長久性超額定負荷運行時的數據信號維護保養。中小型發電機僅設置過負荷維護保養；機發電機應分別配備電機轉子過壓保護和勵磁電流繞阻過壓保護。

6. Overvoltage protection: It is used for data signal maintenance when the generator is operating under long-term overload. Only overload maintenance is set for small and medium-sized generators; The generator shall be equipped with motor rotor overvoltage protection and excitation current winding overvoltage protection respectively.

7、電機轉子繞阻過電流量維護：當發電機縱向差動保護范圍外造成短路故障問題，短路故障電子器件或高壓隔離開關的維護保養拒動時，該維護作為外部短路故障問題的貯備，也作為縱向差動保護的貯備維護保養。

7. Maintenance of motor rotor winding resistance overcurrent: when short circuit fault is caused outside the range of generator longitudinal differential protection, and the maintenance of electronic components or high-voltage disconnectors with short circuit fault refuses to operate, the maintenance is used as a backup for external short circuit fault and also as a backup maintenance for longitudinal differential protection.

8、電機轉子繞阻過壓保護：用于防止所有負載突然缺失而產生的電機轉子繞阻過壓。小型風力發電和大中小型汽輪發電機組均裝有過壓保護，大小型汽輪發電機組一般不設過壓保護。

8. Motor rotor winding over-voltage protection: used to prevent motor rotor winding over-voltage caused by sudden loss of all loads. Small wind power generation and large, medium and small steam turbine generator units are equipped with overvoltage protection, while large and small steam turbine generator units are generally not equipped with overvoltage protection.

為了更好地保證所有發電機乃至全部發電站的沒問題的平穩運行，應根據發電機的實際情況進行相關的維修保養，這樣才能讓發電機維修順利且質量高，還能延長其使用壽命，您有什么需求就來我們網站http://m.hdlelisa.com進行咨詢了解吧！

In order to better ensure the smooth and stable operation of all generators and even all power stations, relevant maintenance should be carried out according to the actual situation of the generator, so that the generator can be repaired smoothly and with high quality, and its service life can be extended. If you have any needs, please come to our website http://m.hdlelisa.com Consult and understand!