氣發電機組作為機組類型的一種，使用行業很多，例如養殖業、食品類廢水處理、餐廚垃圾處理等也利用沼氣發電機組等。下濟柴介紹一下沼氣發電機組的調試方法步驟，希望能給用戶帶來參考。

As a type of unit, gas generator sets are used in many industries, such as aquaculture, food wastewater treatment, kitchen waste treatment, etc. biogas generator sets are also used. Next, jichai introduces the commissioning methods and steps of biogas generator set, hoping to bring reference to users.

1、查抄沼氣發電機組局部的外導體銜接沒有斷線，此時用電壓表丈量D+點有無電壓，并察看充電指示燈能否亮堂。

1. Check that there is no disconnection in the connection of local external conductor of biogas generator set. At this time, measure the voltage at point D + with a voltmeter, and check whether the charging indicator light is on.

2、將鑰匙門開的地位上去，但不啟動沼氣發電機組，此時用電壓表丈量電壓能否在D點和察看充電指示燈和亮堂。

2. Open the key door, but do not start the biogas generator set. At this time, use a voltmeter to measure whether the voltage is at point D and check whether the charging indicator light is on.

3、啟動沼氣發電機組，該沼氣發電機組在B點用電壓表丈量電壓，應到達以下值加減油門電壓24V體系電壓27V以上電壓高于12燃氣發電機組V的13V體系，而有一點點的變革0.1～0.2V。

3. Start the biogas generator set. The voltage of the biogas generator set shall be measured with a voltmeter at point B, which shall reach the following value. Add or subtract the throttle voltage 24V system voltage above 27V, and the voltage is higher than the 13V system of 12 gas generator set V, with a little change of 0.1 ~ 0.2V.

4、翻開局部負荷，如燈12V體系電壓超13V同時加減油門電壓24V體系電壓27V或中度的變革在0.2～0.4V。

4. Turn over the local load. For example, the lamp 12V system voltage exceeds 13V, and increase or decrease the throttle voltage 24V, and the system voltage 27V or moderate change is 0.2 ~ 0.4V.

5、翻開空調，燈光等重要電氣體系電壓為13V12V以上的油門，而減法，電壓24V體系27V以上的電壓有較大水平的變革0.5～1V。

5. Turn on the accelerator with the voltage above 13v12v in air conditioning, lighting and other important electrical systems, while the subtraction shows that the voltage above 27V in 24V system has a great change of 0.5 ~ 1V.

三步中沼氣發電機組無電壓輸入，能夠作為一種辦法來查抄。

In the three steps, the biogas generator set has no voltage input, which can be checked as a method..